Visco Bath According to ASTM D445
Model: "ME-18V" JULABO

• Working temp. range + 20...+150 oC
• Temperature stability +/- 0.01 oC
• Programmer with real time clock
• Built-in cooling coil for applications at or near ambient using tap water cooling

Standard equipment
Ventilation and Control Incubators INB / INE / INP
Model : INB 400 Memmert

• natural convection
• continuous adjustment of pre-heated fresh air admixture
• vent connection with restrictor flap
• microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
• one Pt100 sensor class A in 4-wire-circuit
• integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand-by mode
• digital LED- display of set and actual temperature as well as remaining process time
• resolution of display for set value and actual value 0,5 °C

Waterbaths WNB / WNE / WPE

Memmert waterbaths are available in six model sizes and two performance classes. In addition to the Basic class for standard thermostating tasks, the Excellent version provides precise test procedures with a maximum of safety: electronic overtemperature control and a wide range of visual and acoustic signals, for example if the filling level is too low, for overtemperature, but also for input acknowledgement or the end of the programme. In the largest model an optional circulation pump provides an even better thermal uniformity of the water. Choose from:

• 6 model sizes  (7l to  45l)
• A extensive range of optional accessories, e.g. flat or gable lid, shaking device, reversible shelf, test tube racks
• State-of-the-art control technology of the Basic and Excellent performance classes for all models
• Can be optionally equipped with water level control

Compact Tabletop Centrifuge KA-1000A KUBOTA

In choosing a tabletop centrifuge which is compact, reasonable and applicablefor aclinical test,the KA-1000 model is ideal.
Maximum Speed : 4,000 rpm
Maximum RCF :2220 xg
Maximum Capacity : 120 ml (8x15 ml)
Dimesions(WxDxH) : 310x300x290 mm
Weight : 16 kg.

Micro Hematocrit Centrifuge 3220 KUBOTA

Three Different Rotors
The 3220 gives you exceptional versatility, able to accept three different rotors. The standard hematocrit rotor can spin 30xcapillary at 12,000rpm, the HT/2 rotor can 8x2mL tubes or 24xcapillary at 12,000rpm, and the HT/15 rotor can 4x15mL tubes
at 4,000rpm or 24xHematocrits at 12,000 rpm.

Brushless Motor
With brushless motor operation, the 3220 is suitable for clean-room environments, without the associated problems of exchanging cumbersome carbon brushes.